产品特征 |
|
• 100W (8.3A @ 12V) output • 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements) • Rugged metal enclosure for standard VESA 75/100 mounting • Web-based, remote network management, no software installation required • Local PC-based monitoring software for input detection and battery status monitoring • Auto shut down when battery low • Remote DC output ON/OFF switch for external switch installation • Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,protecting expensive equipment | |
|
产品规格 |
|
Input |
Input voltage Uinated/range |
DC +12V~+36V |
Input current rated |
1. Adapter is 12V--9A (Load is 100W) 2. Battery is 12V--9A (Load is 100W) |
Standby power consumption |
0.3A (0.2A if Network Management disabled) |
Operation with charging current |
500mA |
Operation with charging power consumption |
10W |
Charging time with system ON/OFF |
8hrs / 2hrs (Battery empty) | |
Output |
Output voltage for normal operation |
DC +12V +/-5% |
Output voltage for battery operation, approx. |
12~16.8V DC 12V (exhaustive discharge protection) |
output current |
0A~8.3A |
Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading |
94% | |
Protection |
short-circuit protection |
Yes |
Exhaustive discharge protection |
1.Battery low is 10% of Battery capacity 2.Shuntdown 5% of Battery capacity (Default) 3.The end of Battery discharge voltage is 6V |
EMC / Safety certification |
UL, TUV. CE, FCC | |
Weight |
1.8kg |
Storage Temperature |
-20C~50C |
Operation Temperature |
0C~40C |
Dimensions |
174mm(L) * 147mm(W)*35mm(H) |
LED Indicator |
Green - DC power input Yellow - Battery charging Orange - Bettery discharging |
Monitoring |
Ethernet interface |
Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable |
USB interface |
PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B"connector to DC-UPS | |
Battery |
Battery Model Name |
BAT-LI-2S2P3800 |
battery type |
Li-Ion 2S2P 7.4V |
Battery capacity |
8.4V |
The end of discharging voltage |
5.6V |
Suggestive charging current (Max.) |
2A |
System continuous discharging current(Max) |
7.6A |
The end of charge condition |
250mA/1Min |
Discharge protection |
Under Voltage Protection / Over Current Protection |
Charge protection |
Over Voltage Protection / Over Current Protection |
Ambient temp |
0C~40C |
Storage Tem |
-20C~60C |
Self-discharge rate |
340uA~440uA |
Dimensions |
139mm(L) * 47mm(W)*26mm(H) |
Weight |
236g |
Cycle life |
300 charge/discharge cycles |
Backup |
60W/10Min |
Safety class |
CE,UL,TUV | | | |
|
订购信息 |
|
产品名称 |
描述 |
AUPS-B20-R10 |
VESA 100, DC 9~36V input, 12V output 100W UPS module with 3800mAH, 2S4P Li-Ion battery |
BAT-LI-4S2P3800 |
SMART BATTERY;TE9IC042K1002 ;Lithium ion Battery(4S2P); 14.8V;3800mAh;RoHS | | |
|
包装清单 |
|
1 * DC power cable,150mm. mini Din 4 pin male to DC plug 5.0x2.1(P/N:32000-115400-RS) |
1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 without lock (P/N: 32000-120400-RS) |
1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 with lock (P/N:32000-115300-RS) |
1 * USB cable, 200mm, USB type A male to mini USB (P/N: 32000-115500-RS) |
1 * Remote switch cable, 1200mm (P/N:32000-115600-RS) |
1 * Screws kit (P/N:44013-030041-RS) |
1 * Utility CD (including utility software and user's guide, P/N: 7B000-000087-RS) |
| | |