Input |
nput : 90 VAC - 130 VAC or 180 VAC - 260 VAC |
Output |
(Max. output power 230 W at 30ºC)
Voltage |
Min.load |
Rated Load |
Max. Load |
Voltage Accessory |
+5V |
4.0 A |
20 A |
25 A |
4.80 V to 5.20 V |
+12V |
1.0 A |
10 A |
12 A |
11.4 V to 12.9 V |
-12V |
0.1 A |
0.5 A |
1 A |
-11.30 V to -12.60 V |
-5 V |
0.1 A |
0.5 A |
1 A |
-4.65 V to -5.25 V | |
Ripple and Noise |
The peak to peak ripple and noise for the +5 V output is less than 50 mV,for the +/-12 V and -5 V output it's less than 100 mV. |
Line Regulation |
The line regulation for each output is less +/- 1% while measuring at rated load and +/-10% or 115VAC or 230VAC input voltage changing. |
Load Regulation |
The output voltage load regulation is less than the following values when changing each output and 40% to 60% rated load, with all other outputs at 60% of the rated load.
+5V:+/-4% |
+12V:+/-5% |
-12V:+/-5% |
-5V:+/-2% | |
Watt |
230W |
Hold-up Time |
>16ms |
Efficiency |
70% typical |
Protection |
Output protection: Overvoltage and short protection |
MTBF |
122,347 Hrs |
Safety |
CSA22.2 No. 234; |
EMI |
ECC docket 20780 curve"B" ; EN55022 class "B" |
Power good signal |
Go high 100ms to 500ms after all output DC Voltages are within regulation limits. |
Power connectors |
DIN 41612 C96 |
Storage Temperature |
-40 ºC~ 75ºC |
Operation Temperature |
0 ºC~ 50ºC(derating about 20% form 30ºC to 50ºC) |
Dimensions |
140 x 150 x 86mm |
Pin |
Pin Assignment:
Pin 1 |
AC L |
Pin 11, 12, 13 |
+12V |
4 |
AC N |
11~25 |
GND |
9 |
-5 V |
26~31 |
+5V |
10 |
-12V |
32 |
Power good | |
Cooling |
Cooling with a 42CFM fan |