Industrial 1-port RS232 to 1-port 10/100TX Device Server
Overview
IDS-5011 is an innovative 1 port RS232 to 1 port LAN device server. To assure the agility and security of critical data, IDS-5011 offers many powerful features for HW & SW redundant functions. IDS-5011 can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PCs to avoid Ethernet break or host PCs failure. Secondly, IDS-5011 provides dual redundant power inputs on DC power jack and terminal block. IDS-5011 also provides NAT pass through function so that users are able to manage IDS-5011 inside or outside the NAT router. It is easy for different IP domain users to use IDS-5011. Therefore, IDS-5011 is one of the best communication redundant solutions for application of serial devices.
产品特征
•
Redundant 5 multiple host devices supported to protect your industrial network
•
Versatile modes & event alarm by e-mail
•
HTTPs & SSH protocol supported for secured management
•
NAT router pass through
•
IP table to prevent access from unauthorized IP address
•
Confi gurable by Web-based and Windows utility (DS-Tool)
•
Dual redundant DC power inputs of terminal block and power jack
•
Rigid IP-30 housing design
•
DIN-Rail and panel mounting enabled
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
1
Serial Ports
Connector
DB9 x 1
Operation Mode
RS232
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power Indicator
PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red : Serial port is receiving data Green : Serial port is transmitting data
Power
Input Power
Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack